SAKSON provides easy and low-cost solutions to mitigate any problems.
Lead in drinking water has gained national attention with problems in Flint, Michigan and Newark, New Jersey to name a few. Lead can enter drinking water when plumbing materials that contain lead corrode, especially where the water has high acidity or low mineral content that corrodes pipes and fixtures. The most common sources of lead in drinking water are lead pipes, faucets, and fixtures. Both lead and copper are common contaminants that may leach from facility piping or solder, even if water is supplied by the city or a private company.
In response, the State of New Jersey has implemented rigorous water testing requirements at child care centers and schools. Further, Paul Sakson Environmental recommends drinking water testing at other critical sites, such as residences and occupied commercial establishments.
SAKSON has collected drinking water samples at hundreds of child care centers to comply with their three-year testing requirement. Samples are collected, analyzed by a NJDEP Certified Laboratory, and SAKSON prepares all the required forms and documentation to make complying hassle free. And of course, if there’s an issue with a contaminant, SAKSON provides easy and low-cost solutions to mitigate the problem.
Frequently Asked Questions
Why should I get my drinking water tested?
Although you may be connected to city water, or a private water company, lead and copper contaminants may enter your water supply through your interior piping. This is a common occurrence in very old houses or buildings, and newer structures that have recently installed copper lines, or may have used lead solder. Lead and copper area both contaminants which can cause a variety of adverse health effects.
How long does the test take?
Samples are collected from a drinking water faucet and sent to a New Jersey certified laboratory. Typical turnaround time is two weeks, although expedited turnaround of 2 business days is available.
How much does drinking water testing cost?
Each metal costs $30 to analyze, plus labor and travel costs for our sampling technicians.
Where can I find out more?
Feel free to contact one of our certified technicians. An excellent government resource is at the EPA website: Basic Information about Lead in Drinking Water | Ground Water and Drinking Water | US EPA